Lumax LX-1426 Silver Small Four-Way Grease Fitting Tool

Lumax LX-1426 Silver Small Four-Way Grease Fitting Tool Review

Lumax LX-1426 Silver Small Four-Way Grease Fitting Tool Feature

• All-in-one fitting tool used to install and remove
• For tapping / chasing 1/4-28 threads
• For 1/4 inches, 5/16 inches and 3/8 inches straight or angle fittings
• Has broken fitting removal tool
• Slotted for installing 30/45/65/90 degree grease fittings

The grease fitting installation and removal tools is an all-in-one tool to install new straight and angle-type fittings, rethread holes and remove straight, angle-type or old pin type broken fittings. This small, 4-way grease fitting tool is for tapping 1/4 inches-28 threads and removal of 5/16 inches and 3/8 inches straight or angle fittings.

Valterra T1020-5VP Gray Water Drain Adapter

Valterra T1020-5VP Gray Water Drain Adapter Review

Valterra T1020-5VP Gray Water Drain Adapter Feature

• Easy thumb grip
• Allows for grey water sewer hook-up using 1/2 inch and 5/8 inch waste water hose

Gray Water Drain Adapter features easy thumb grip. Allows for grey water sewer hook-up using 1/2" and 5/8" waste water hose. For use with bayonet sewer fittings 3/4" garden hose connection with cap.

JCJ M-200 Mud Dauber Screen for RV furnace Outside Fitting

JCJ M-200 Mud Dauber Screen for RV furnace Outside Fitting Review

JCJ M-200 Mud Dauber Screen for RV furnace Outside Fitting Feature

• RV furnace and fan unit outside fittings
• Fits Coleman, Hydroflame, Sol-Aire and Suburban

Mud Dauber Screens keeps pesky mud daubers, mice, wasps, frogs, birds and spiders from nesting in your appliances. These stainless steel screens and springs will not block air flow to and from your furnace. Installs easily with tension springs and installation tool (included).

25 Brass Compression Fitting Sleeves 3/16"

25 Brass Compression Fitting Sleeves 3/16" Review

Sleeve

Tube Size: 3/16"

Compression Brass Fittings

25 Per Package

Allstar Performance ALL50138 1/8" NPT Tee Gauge Fitting

Allstar Performance ALL50138 1/8" NPT Tee Gauge Fitting Review

Allstar Performance 50138 GAUGE FITTING.

Alemite 339841 Alemite Grease Fitting Cleaner

Alemite 339841 Alemite Grease Fitting Cleaner Review

Alemite 339841 Alemite Grease Fitting Cleaner Feature

• grease fitting cleaner tool

This professional heavy duty tool is perfect for unplugging clogged grease fittings. A light viscosity oil is injected into the faulty joint, loosening grease and allowing for new grease to enter. This tool saves the time of replacing fittings and joints.

Parts Unlimited Single Tank Fuel Fitting - 5/16in. 2105-1000

Parts Unlimited Single Tank Fuel Fitting - 5/16in. 2105-1000 Review

Parts Unlimited Single Tank Fuel Fitting - 5/16in. 2105-1000 Feature

• Metal gas tank fittings have rubber bushings to fit 1/2in. holes in metal or plastic tanks
• Single, 90 deg. push-in design is original equipment on many machines
• Fittings work well for custom applications

Metal gas tank fittings have rubber bushings to fit 1/2in. holes in metal or plastic tanks
Single, 90 deg. push-in design is original equipment on many machines
Fittings work well for custom applications

Spectre 5945 Chrome Straight Hose Fitting

Spectre 5945 Chrome Straight Hose Fitting Review

Spectre 5945 Chrome Straight Hose Fitting Feature

• 3/8" national pipe thread to 3/8" barb
• Straight-style hose fitting
• Chrome finish

This hose fitting has a straight-style with a chrome finish and measures 3/8" pipe thread to 3/8" barb.

Aluminum Track Tiedown Fitting 5,000 lb. Capacity Tiedowns 4-Pack

Aluminum Track Tiedown Fitting 5,000 lb. Capacity Tiedowns 4-Pack Review

Aluminum Track Tiedown Fitting 5,000 lb. Capacity Tiedowns 4-Pack Feature

• This listing is for four (4) fittings. When purchased individually they cost .50 each, therefore saving .05.
• Double Stud 5,000 lb.* capacity rating. WLL (working load limit) is 1,666 lb. capacity.
• The fittings' steel base is zinc plated to inhibit corrosion.
• Base measures 2-2/8" long x 7/8" wide. 1/4" thick steel "O" ring measures 2" in diameter.

Double Stud w/ "O" ring - 5,000 lb. capacity rating. This fitting fits all aluminum tracking similar to the track in the image above. Double stud refers to the number of "fingers" that it captures when attached. The fittings' steel base is zinc plated to inhibit corrosion. It is SPRING LOADED to permit simple attach and detach operation. To detach, simply pull up on the spring loaded mechanism and then slide forward or back and the fitting releases. To attach, rest the fitting in the load track, then push down on the base and push forward. The double stud fitting attaches to two sets of "fingers" in the load track, thus giving you a more secure attachment than the single stud fitting. IT IS NOT recommended to pull at an angle greater than 45 degrees. As a rule of thumb you lose about half your rating at a 45 degree angle. * WLL The maximum load weight a tie-down should be subjected to during normal use. To assist in making the proper tie-down choice the Federal D.O.T. requires the W.L.L. to be 1/3 of the Rated Capacity.

Ford 6.0L STC HPOP Fitting Update Kit Ford p/n 4C3Z-9B246-F

Ford 6.0L STC HPOP Fitting Update Kit Ford p/n 4C3Z-9B246-F Review

Ford 6.0L STC HPOP Fitting Update Kit Ford p/n 4C3Z-9B246-F Feature

• Converts Your Powerstroke HPOP To The "Snap-to-Connect" or STC Fitting
• More Durable
• Improved Flow
• Includes All of The Parts Needed For The Update
• Come With New O-Rings and Gaskets

The Ford 6.0 STC HPOP Fitting Update Kit 4C3Z-9B246-F was the redesign of the high pressure oil pump for 2005 and newer Power Stroke diesel engines the "snap-to-connect" or STC fitting used to connect the high pressure oil pump to the oil supply branch tube has been problematic. The two piece fittings have a tendency to flex causing wear on the seal and the locking ring resulting in leaks and occasionally the complete separation of the fitting. When a leak occurs at this fitting, the engine may be difficult to start or may not start at all. Depending on the severity of the leak the engine may stall, sometimes abruptly and without warning.

Earl's 991955 Blue Anodized Aluminum -6AN Male to 16mm by 1.5 Power Steering/ Fuel Injection Adapter Fitting

Earl's 991955 Blue Anodized Aluminum -6AN Male to 16mm by 1.5 Power Steering/ Fuel Injection Adapter Fitting Review

Earl's 991955 Blue Anodized Aluminum -6AN Male to 16mm by 1.5 Power Steering/ Fuel Injection Adapter Fitting Feature

• Manufactured from aircraft quality aluminum that is lightweight, but durable
• Should not be overtorqued
• AN adapter side seals on the flare (cone) not the threads
• Made in the USA

This Earl's power steering and fuel injection specialty aluminum adapter fitting simplifies the connection of a AN hose assembly to the power steering or fuel injection.

Aeroquip FCM4033 Aluminum -08AN 90-Degree Elbow Fitting

Aeroquip FCM4033 Aluminum -08AN 90-Degree Elbow Fitting Review

Aeroquip FCM4033 Aluminum -08AN 90-Degree Elbow Fitting Feature

• #8 90DEG. ELBOW HOSE END

#8 90DEG. ELBOW HOSE END

Derale 98200 -6AN Female x 3/8" AN Swivel Hose Barb Fitting

Derale 98200 -6AN Female x 3/8" AN Swivel Hose Barb Fitting Review

Derale 98200 -6AN Female x 3/8" AN Swivel Hose Barb Fitting Feature

• AN swivel hose barb fitting
• -6AN female swivel x 3/8 inch hose barb

-6AN female x 3/8 inch brass swivel hose barb fitting, sold individually.

SRP GM Caliper Fitting, 7/16" SAE Banjo 20 - 40275

SRP GM Caliper Fitting, 7/16" SAE Banjo 20 - 40275 Review

SRP GM Caliper Fitting, 7/16 SAE Banjo 20 - 40275• Application - GM steel calipers • GM brake caliper fitting 7/16 SAE banjo bolt -20• Strong steel construction

Edelbrock/Russell 670350 Red and Blue Anodized Aluminum -8AN Fuel Pressure Take Off Fitting

Edelbrock/Russell 670350 Red and Blue Anodized Aluminum -8AN Fuel Pressure Take Off Fitting Review

Edelbrock/Russell 670350 Red and Blue Anodized Aluminum -8AN Fuel Pressure Take Off Fitting Feature

• Fuel Pressure Take Off measures -8 AN
• Has red and blue anodized finishes
• 1/8 NPT side port
• Provides maximum protection against corrosion and the ultimate in strength and appearance
• Made of top-quality materials and long life with blue anodized finish

The Edelbrock/Russell's lightweight aluminum adapter fittings allow for the connection of Russell hose ends to almost any component. The adapters are offered in standard thread, metric thread and pipe thread to fit most popular oil pumps, fuel pumps, fuel filters plus a variety of other common components.

Camco 39842 RhinoFLEX RV 45 Degree Sewer Hose Swivel Fitting

Camco 39842 RhinoFLEX RV 45 Degree Sewer Hose Swivel Fitting Review

Camco 39842 RhinoFLEX RV 45 Degree Sewer Hose Swivel Fitting Feature

• 45 degree swivel sewer hose fitting
• Built-in gaskets for odor tight connection
• Has swivel lug fitting and swivel bayonet fitting
• Connect sewer hose to waste valve fitting
• Made in the USA

Camco's RhinoFLEX RV 45 degree Sewer Hose Swivel Fitting has a translucent 45 degree elbow and connects to any fitting with a lug attachment. The lug fitting as well as bayonet fitting swivel for easier connecting and disconnecting. Bayonet fitting has built-in gasket for odor tight connection.

Red Dragon HP-25 25-Foot Liquid or Vapor Propane Hose With Male 1/4-Inch Fittings

Red Dragon HP-25 25-Foot Liquid or Vapor Propane Hose With Male 1/4-Inch Fittings Review

Red Dragon HP-25 25-Foot Liquid or Vapor Propane Hose With Male 1/4-Inch Fittings Feature

• U.L. Listed for use with either vapor or liquid LP-gas
• Maximum working pressure of this hose is 350 PSI with a burst test of 1750 PSI.
• A 1/4-inch female brass coupling is included with each hose.
• Available in 10-Foot, 25-Foot and 50-Foot lengths
• Each hose is coupled with 1/4-inch male pipe thread fittings on both ends

LIQUID HOSE25 FEET