SRP GM Caliper Fitting, 7/16" SAE Banjo 20 - 40275

SRP GM Caliper Fitting, 7/16" SAE Banjo 20 - 40275 Review

SRP GM Caliper Fitting, 7/16 SAE Banjo 20 - 40275• Application - GM steel calipers • GM brake caliper fitting 7/16 SAE banjo bolt -20• Strong steel construction

Edelbrock/Russell 670350 Red and Blue Anodized Aluminum -8AN Fuel Pressure Take Off Fitting

Edelbrock/Russell 670350 Red and Blue Anodized Aluminum -8AN Fuel Pressure Take Off Fitting Review

Edelbrock/Russell 670350 Red and Blue Anodized Aluminum -8AN Fuel Pressure Take Off Fitting Feature

• Fuel Pressure Take Off measures -8 AN
• Has red and blue anodized finishes
• 1/8 NPT side port
• Provides maximum protection against corrosion and the ultimate in strength and appearance
• Made of top-quality materials and long life with blue anodized finish

The Edelbrock/Russell's lightweight aluminum adapter fittings allow for the connection of Russell hose ends to almost any component. The adapters are offered in standard thread, metric thread and pipe thread to fit most popular oil pumps, fuel pumps, fuel filters plus a variety of other common components.

Camco 39842 RhinoFLEX RV 45 Degree Sewer Hose Swivel Fitting

Camco 39842 RhinoFLEX RV 45 Degree Sewer Hose Swivel Fitting Review

Camco 39842 RhinoFLEX RV 45 Degree Sewer Hose Swivel Fitting Feature

• 45 degree swivel sewer hose fitting
• Built-in gaskets for odor tight connection
• Has swivel lug fitting and swivel bayonet fitting
• Connect sewer hose to waste valve fitting
• Made in the USA

Camco's RhinoFLEX RV 45 degree Sewer Hose Swivel Fitting has a translucent 45 degree elbow and connects to any fitting with a lug attachment. The lug fitting as well as bayonet fitting swivel for easier connecting and disconnecting. Bayonet fitting has built-in gasket for odor tight connection.

Red Dragon HP-25 25-Foot Liquid or Vapor Propane Hose With Male 1/4-Inch Fittings

Red Dragon HP-25 25-Foot Liquid or Vapor Propane Hose With Male 1/4-Inch Fittings Review

Red Dragon HP-25 25-Foot Liquid or Vapor Propane Hose With Male 1/4-Inch Fittings Feature

• U.L. Listed for use with either vapor or liquid LP-gas
• Maximum working pressure of this hose is 350 PSI with a burst test of 1750 PSI.
• A 1/4-inch female brass coupling is included with each hose.
• Available in 10-Foot, 25-Foot and 50-Foot lengths
• Each hose is coupled with 1/4-inch male pipe thread fittings on both ends

LIQUID HOSE25 FEET

Derale 98100 1/4" NPT Male x 3/8" Straight Hose Barb Fitting

Derale 98100 1/4" NPT Male x 3/8" Straight Hose Barb Fitting Review

Derale 98100 1/4" NPT Male x 3/8" Straight Hose Barb Fitting Feature

• Straight hose barb fitting
• 1/4 inch NPT male x 3/8 inch hose barb

1/4 inch NPT male x 3/8 inch straight brass hose barb fitting, sold individually.

Dorman 785-402 5/16" Brass Hose Fitting

Dorman 785-402 5/16" Brass Hose Fitting Review

Dorman 785-402 5/16" Brass Hose Fitting Feature

• The product is a direct fit replacement unit
• Unit features Dorman engineered quality enhancements
• Product is backed by Dorman's limited lifetime warranty

Dorman is a leading supplier and dealer of exclusive automotive replacement parts, automotive hardware and brake products to the automotive aftermarket. These products are often re-engineered with improvements for better reliability compared to the original part. Additional components needed for a complete repair are typically included as kits with Dorman parts. Dorman also helps reduce repair cost by providing the option to replace just the failed piece, not the assembly. Dorman takes pride in the quality of their products and in your satisfaction.

Hotchkis 1790 Red Zerk Cap, (Pack of 25)

Hotchkis 1790 Red Zerk Cap, (Pack of 25) Review

Hotchkis 1790 Red Zerk Cap, (Pack of 25) Feature

• Zerk cap
• Made in USA
• Engineered to perform
• Quality, reliable parts

Hotchkis Sport Suspension has a 25 Pack of Red Zerk Fitting Caps.

Valterra Products, Inc. T1020-1 3" Black Termination Cap with Bayonet Hook and Hose Thread Connection

Valterra Products, Inc. T1020-1 3" Black Termination Cap with Bayonet Hook and Hose Thread Connection Review

Valterra Products, Inc. T1020-1 3" Black Termination Cap with Bayonet Hook and Hose Thread Connection Feature

• PART# 40733
• IMPROVED DESIGN FOR EASIER TWISTING ON & OFF
• BLACK
• 3/4" HOSE CAP W/STRAP

Termination Cap 3 inch termination cap with bayonet hooks and 3/4 inch hose thread connection with cap.

Moroso 65140 Streamline Fuel Line Fitting

Moroso 65140 Streamline Fuel Line Fitting Review

Moroso 65140 Streamline Fuel Line Fitting Feature

• FUELINE FIT 90DEG3/8TO3/8

Streamline Fuel Line Fittings 90 Deg 3/8 in. NPT To 3/8 in. Hose 1 Per Pack

Holley 26-74 Fuel Inlet Fitting

Holley 26-74 Fuel Inlet Fitting Review

Holley 26-74 Fuel Inlet Fitting Feature

• Fits center-hung fuel bowls
• Measures 7/8-20 male thread diameter to -8 AN
• Made of steel
• Adapts to different sized fuel lines

This inverted flare fitting is made of steel and adapts to different sized fuel lines as well as hose and banjo fittings for special applications. The tube fits center-hung fuel bowls and has a thread diameter of 7/8-20" male to -8 AN.

HOSE FITTING -- BARB TYPE 3/8" ID X 1/4" MALE NPT

HOSE FITTING -- BARB TYPE 3/8" ID X 1/4" MALE NPT Review

HOSE FITTING -- BARB TYPE 3/8" ID X 1/4" MALE NPT Feature

• If You have the right tools You can complete any job!
• We have 8 warehouses in the U.S. so you will get your order Fast!
• Warehouse Locations:

  Cape Girardeau,MO

  Medina,OH

  Lexington,SC

  Montgomery,NY

  Dixon,IL

  Waco,TS

  Woodburn,OR

  Mesquite,NV.

All brass will not rust or corrode. Use with hose clamps or ferrules. 1 per card. No. 21 123: 1 4" I.D. hose, 1 4" Male NPT thread No. 21 133: 5 16" I.D. hose, 1 4" Male NPT thread No. 21 143: 3 8" I.D. hose, 1 4" Male NPT thread No. 21 147: 3 8" I.D. h

Auto Brake Line Tubing Kit - 25' 3/16" w/16 OE Fittings

Auto Brake Line Tubing Kit - 25' 3/16" w/16 OE Fittings Review

This corrosion-resistant steel tubing is just like the original on most cars. All you need is a tubing bender and flaring tool and you're ready to create a replacement line or even a custom one.

Each kit contains:

• 25 ft. of steel tubing (.028" thick wall)
• 16 assorted OEM style fittings (master cylinder fittings, short wheel cylinder)

All fittings are for SAE double-flaring applications.